|
|
mrmagic0 Inner circle Ron Frank 1606 Posts |
I am looking for someone to make me a take apart die. It needs to be small but able to take apart like the old photo cubes. In other words, the cube has beveled edes on two sides so when you grab it in the correct corners it pulls apart.The size I am looking for is about 3/4" square. I want to use the guts from my promystic MD mini inside the die. If it will help I can take a picture of a cube I have here somewhere. The die can be a little bigger if it needs to be. Can anybody do this? PM me.
Ron |
J M Talbot Inner circle 3055 Posts |
Have you considered using the MD Die shell from Craig? I believe the mini MD unit will fit in the shell.
|
mrmagic0 Inner circle Ron Frank 1606 Posts |
Did not know it existed. I'll check it out.
Ron |
mrmagic0 Inner circle Ron Frank 1606 Posts |
Checked with Craig. He does not have a die that would work with the mini md.
Ron |
J M Talbot Inner circle 3055 Posts |
OK, am surprised the MD mini electronics would not fit inside the MD die shell which is larger. Craig obviously would know... but now I am curious and will try with mine tonight
|
mrmagic0 Inner circle Ron Frank 1606 Posts |
It may fit but I'm sure Craig would rather sell his own expensive die rather than offer one that would fit the Minim MD unit.If it works and I am sure the mini Md unit would have to be protected then I will buy one from him but if I can get someone to make a smaller one from a 3D printer that would be what I would like to do. I. of course, would expect to pay for one.
Ron Hint-Hint to 3D printer guys you could make some $ making these up for people who own Promystic mini 3D |
J M Talbot Inner circle 3055 Posts |
Can confirm the electronics will fit in the MD shell easily. Craig may have thought you wanted to fit the actual mini MD in the shell.
|
mrmagic0 Inner circle Ron Frank 1606 Posts |
Ok. Thanks
|
D_avid Loyal user 253 Posts |
Late, but have you looked at Shapeways?
|
The Magic Cafe Forum Index » » The workshop » » Looking for someone with 3D printer (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |