The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » Ever so sleightly » » Please help me identify these cups! (0 Likes) Printer Friendly Version

Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Hi everyone,

I have been lurking on here for several years off & on, but never joined. I was hoping you might be ale to help me with something. Over 20+ years ago, I was given a set of cups from a magic shop I use to frequent at a young age. I was told they were very rare & collectable. I have had them on display ever since.

They do not have a hallmark or any stampings on them. I was considering selling them but I do not know enough about them to set a price.

Someone once told me they may be phoenix cups, but I am just speculating.

I would greatly appreciate any help you could offer.

I am tryong to upload an image, but not sure how to & it's driving me crazy! Can someone help me post the images?

Thank you in advance.

HH
Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Let's try it this way! Click on link:

http://s249.photobucket.com/user/Houdini......rt=1&o=0
Leo H
View Profile
Loyal user
205 Posts

Profile of Leo H
Yeah--those look like the Tom Frank Phoenix cups. Not rare or difficult to find. Good job getting the picture up.
Donnie Buckley
View Profile
V.I.P.
Cleveland, Ohio
1081 Posts

Profile of Donnie Buckley
If you have had them that long then they are probably the Charlie Miller Cups made by Magic Inc. They would have been in your local magic shop. I bought a set about 20 years ago from Ted Carrothers in Toledo.
Learn the form, but seek the formless. Learn it all, then forget it all. Learn the way, then find your own way. Rings-N-Things
Mobius303
View Profile
Inner circle
Mike Perlman
1066 Posts

Profile of Mobius303
They look like Charlie Miller Cups to me too. The time sounds right also.
You can tell by the area between the mouth of the cup and the ring. They are based on the Ross Bertram Cups. I would ask Bill to be sure.
They look like they are in great shape.
Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Quote:
On 2013-10-23 22:05, Mobius303 wrote:
They look like Charlie Miller Cups to me too. The time sounds right also.
You can tell by the area between the mouth of the cup and the ring. They are based on the Ross Bertram Cups. I would ask Bill to be sure.
They look like they are in great shape.


Thanks. Can I ask who is Bill & how do I get a hold of him? Also, any idea on the value?

Thanks again.

HH
shellgame-al
View Profile
Loyal user
California, USA
217 Posts

Profile of shellgame-al
They look new!
Manufacture of the Bottom Ridge Shells.
Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Quote:
On 2013-10-23 22:43, shellgame-al wrote:
They look new!


I just did a light polish, they clean up great. So how can I tell if these are Charlie Miller cups or actual Ross Bertram cups? OR am I just dreaming? If they are "only" Charlie Miller cups, any idea on value?
Andrew Zuber
View Profile
Inner circle
Manhattan Beach, CA
2500 Posts

Profile of Andrew Zuber
Bill is Bill Palmer - he's a member here and is our resident cups expert, as well as the curator of the online cups and balls museum.
"I'm sorry - if you were right, I would agree with you." -Robin Williams, Awakenings
Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Quote:
On 2013-10-24 00:19, Andrew Zuber wrote:
Bill is Bill Palmer - he's a member here and is our resident cups expert, as well as the curator of the online cups and balls museum.


Well, He sounds like the person I need to talk too! Any chance you have his contact info? Thank you very much.
Harry Murphy
View Profile
Staff
Maryland
5041 Posts

Profile of Harry Murphy
Go to the "Search"function at the top of the page. Type in user name "Bill Palmer" and select "Boxes, Tubes, and Bags" as the forum (it is one I know he has posted in). When it comes up you can click on his name and it will take you to his profile. You can either PM him directly from there or click on his email address and email him.

Or click on his profile page here:
http://www.themagiccafe.com/forums/bb_pr......ser=4412
The artist formally known as Mumblepeas!
Donnie Buckley
View Profile
V.I.P.
Cleveland, Ohio
1081 Posts

Profile of Donnie Buckley
But... Bill doesn't accept PMs at the Café.

No matter. You have Charlie Miller Cups. I can tell by the lines around the shoulder beads where the shoulder beads were pressed in, the spin lines, and the wide gap around the mouth bead. They are identical to the set I own.
Their value fluctuates depending upon a lot of variables - economic mostly. They have sold for $125 - $350.
I still have my set. If I was going to put them up for sale, I would ask $300. Weirdly there are a lot of fans of these cups, even though they are far from being an efficient design.

I think I paid about $35 for them 20 years ago. They came in a plastic bag, with an instruction sheet from Magic, Inc. which called them "The Charlie Miller Cups, A man's cup" - because at the time they were considered a heavier weight cup - which is not true by today's standards. The design was based upon the Ross Bertram Cups, but didn't get it right. As I recall, Charlie Miller distanced himself from these cup sets, but his name stuck to them. I don't know the full story and my memory is unreliable. Smile
If they were actual Ross Bertram Cups, you would know it, because they were collectible 20 years ago (Ross was born in 1912). Look at the photo of a Bertram Cup in silver here:
http://rossbertram.magicana.com/rossbert......man.html
As you can see, it's not the same. The shoulder beads are not just rolled in, they are cut in. The mouth bead has no gap and the radius from the side wall to the saddle appears to be smoother.
You have Charlie Miller Cups.
Learn the form, but seek the formless. Learn it all, then forget it all. Learn the way, then find your own way. Rings-N-Things
Houdini1911
View Profile
New user
7 Posts

Profile of Houdini1911
Quote:
On 2013-10-24 10:00, Donnie Buckley wrote:
But... Bill doesn't accept PMs at the Café.

No matter. You have Charlie Miller Cups. I can tell by the lines around the shoulder beads where the shoulder beads were pressed in, the spin lines, and the wide gap around the mouth bead. They are identical to the set I own.
Their value fluctuates depending upon a lot of variables - economic mostly. They have sold for $125 - $350.
I still have my set. If I was going to put them up for sale, I would ask $300. Weirdly there are a lot of fans of these cups, even though they are far from being an efficient design.

I think I paid about $35 for them 20 years ago. They came in a plastic bag, with an instruction sheet from Magic, Inc. which called them "The Charlie Miller Cups, A man's cup" - because at the time they were considered a heavier weight cup - which is not true by today's standards. The design was based upon the Ross Bertram Cups, but didn't get it right. As I recall, Charlie Miller distanced himself from these cup sets, but his name stuck to them. I don't know the full story and my memory is unreliable. Smile
If they were actual Ross Bertram Cups, you would know it, because they were collectible 20 years ago (Ross was born in 1912). Look at the photo of a Bertram Cup in silver here:
http://rossbertram.magicana.com/rossbert......man.html
As you can see, it's not the same. The shoulder beads are not just rolled in, they are cut in. The mouth bead has no gap and the radius from the side wall to the saddle appears to be smoother.
You have Charlie Miller Cups.


Thank you for the time to write all that out. I guess I have Charlie Miller cups! Thanks again.
Rainboguy
View Profile
Inner circle
1294 Posts

Profile of Rainboguy
I agree with Donnie....those are Charlie Miller cups, not Phoenix Cups nor Ross Bertram cups......

I bought my set at Magic, Inc. about 25 or so years ago when Bruce Bernstein saw me walking in the front door and said to me "I found something in the back you might like" then came out front with them. I think I paid $40 for them.

My best advice is to hold on to them....."they ain't making 'em any more"....they are good, solid, heavy-duty worker's cups....BUT, if you need to sell them, Donnie's price seems right to me.......Personally, I would NOT accept less than $300.

Good luck!
The Magic Cafe Forum Index » » Ever so sleightly » » Please help me identify these cups! (0 Likes)
  Next Topic >>>
[ Top of Page ]
All content & postings Copyright © 2001- 2014 Steve Brooks. All Rights Reserved.
This page was created in 0.149528 seconds, requiring 46 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

[1] [0] [5] [1] [8] [3] [2] [5] [5] [3]