|
|
Zedd Loyal user Germany 270 Posts |
Hello,
Wäre can I get cards with back designs like Bicycle or Tally-Ho card boxes? Best regards, Zedd |
Poof-Daddy Inner circle Considering Stopping At Exactly 5313 Posts |
PHOENIX Brand. Made for magicians by a magician and the box art is the same as the card back.
My take on them --- www.themagiccafe.com/forums/viewtopic.ph......&forum=2 and Check Out his site. www.card-shark.de Very good quality at a very reasonable price
Cancer Sux - It is time to find a Cure
Don't spend so much time trying not to die that you forget how to live - H's wife to H on CSI Miami (paraphrased). |
Poof-Daddy Inner circle Considering Stopping At Exactly 5313 Posts |
Or... Are you looking for the other "back design" from the card box on the card instead of a regular bicycle back pattern? If so you want the Paul Harris Limited Edition Inversion Deck. www.penguinmagic.com/p/2696
Card-Shark has a couple similar cards with the Phoenix Front Design in the Prism Deck too if you go the Phoenix route as I did.
Cancer Sux - It is time to find a Cure
Don't spend so much time trying not to die that you forget how to live - H's wife to H on CSI Miami (paraphrased). |
Zedd Loyal user Germany 270 Posts |
Great - thank you!!!
Best regards, Zedd |
motown Inner circle Atlanta by way of Detroit 6127 Posts |
Gary Plants sells Bicycle card box card. Dan Harlan has a nice effect on his DVD using one based on a Larry Becker idea.
"If you ever write anything about me after I'm gone, I will come back and haunt you."
– Karl Germain |
nattefrost Special user 703 Posts |
I actually make them sometimes by carefully cutting a card box, shaping it like a card, then adding a face or back and sticking it together. It will be a little thicker, though, if you want a face or back on the other side. I am not that good at splitting cards, but if you are, you could help the thickness by splitting a face or back, then sticking it to the back of the card box. If you make a "back" of a card box card, I use the little sticker seal and cut it in half and re-stick it back on to the box card to make it look better and line it up with the other half of the sticker when you close the actual box.
|
darksage New user 72 Posts |
Is there a source for the Tally Ho box backs on the cards like the inversion deck above?
|
pepka Inner circle Uh, I'm the one on the right. 5041 Posts |
Or if you want Bicycle boxes that still use the Rider back design, check out the Richard Turner Gold Seal Bicycles. www.waltonmagic.com
|
darksage New user 72 Posts |
Thanks for posting this website; the prices seem good!
|
LesL Regular user 185 Posts |
Bicycle 807 decks from Bicycle website or Turner's Gold Seal from Penguin Magic are comparably priced and both feature older tuck box design. Turner's are probably the better deal for card quality.
|
nattefrost Special user 703 Posts |
I have the "Mash Pack" from Garrett Thomas and you get a bonus effect with it and it is an entire deck of card box cards. and besides making my own like I stated before, Gary Plant sells a 2-pack of these cards for $10. One has a queen on one side and the front of the box on the other side and I believe the other card had the front of the box on one side and the back of a card on the other side.
|
The Magic Cafe Forum Index » » Gaffed & Funky » » Back design like card box (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.02 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |