|
|
funstuff Regular user 103 Posts |
Im hoping someone can help me with some contact info so I can reach the people at The Enchantment concerning my Dreamweaver effect. Ive searched their site and the booklet with the effect and have found nothing. Any help would be appreciated.
|
GeorgeSantos Inner circle San Diego, CA 1106 Posts |
Have you tried searching in http://www.google.com ?
"David Roth is the greatest coin manipulator in the entire world.."
-Dai Vernon "The Professor" I AM A FILIPINO MAGICIAN |
funstuff Regular user 103 Posts |
All I come up with are stores carrying it
|
Brian Tanner Loyal user Ohio 297 Posts |
Hi Funstuff.
Go to http://www.theenchantment.com They are the manufacturers of Dreamweaver. I'm sure they''ll be glad to help. |
funstuff Regular user 103 Posts |
Quote:
On 2005-02-07 12:06, Brian Tanner wrote: like I stated initially , I have been there and searched everywhere. There is no contact info listed that I can find. |
Dave Le Fevre Inner circle UK 1666 Posts |
I had the same problem. I simply wanted to buy some more of the "vanilla" pins, and I couldn't find that size anywhere. I searched high and low for contact details, but to no avail.
Dave
The Ozzy Osbourne of the 34x27
|
funstuff Regular user 103 Posts |
I actually found a hidden page from there website with a contact email I beleive it was information@theenchantment.com if you still need it.
|
Dave Le Fevre Inner circle UK 1666 Posts |
Great!
Thanks very much, Dave Five minutes later - it bounced, couldn't deliver
The Ozzy Osbourne of the 34x27
|
paymerich Special user Norwalk, CT 546 Posts |
I am interested in any contact info too . I also need more plain pins..
Have a Magical Day!
<BR> <BR>The Maniacal Mage <BR> <BR>Pablo Aymerich <BR>Norwalk, CT 06851 |
funstuff Regular user 103 Posts |
I have a link to plain pins..... gold and silver about $7 per 144 of 3"
http://www.candjcraftsupply.com/safety_p......acks.htm Heres the link to the hidden page....... http://www.theenchantment.com/id20.htm And the email address was Questions@theenchantment.com Hope that helps. |
Dave Le Fevre Inner circle UK 1666 Posts |
Thanks for that link.
Longer pins may have fatter heads - I have some Mak Magic pins which are good for Dreamweaver, but the proportionately fatter heads increase the possibility of the s*** pin being noticed. So maybe the standard Dreamweaver size is optimal. And that would seem to be the 2¼" length. If the 3" pins have equally slim heads, then they might be advantageous. I managed to find the same size in Mothercare, but they’re much stiffer, and therefore far more difficult to “s***en” and to “uns***en”. So I'd be wary of bulk buying some possibly-too-stiff pins. (Though what the heck, it doesn't cost much.) And thanks for the e-address - I'm trying it right now. Dave .....but still no answer from The Enchantment. So much for customer service. Dave
The Ozzy Osbourne of the 34x27
|
rikbrooks Inner circle Olive Branch, Mississippi 1317 Posts |
You guys convinced me. I just bought it.
|
The Magic Cafe Forum Index » » Rings, strings & things » » Dreamweaver Contact Info (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.02 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |