The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » Finger/stage manipulation » » Snowstorm in China Fan Problems (0 Likes) Printer Friendly Version

Darkwing
View Profile
Inner circle
Nashville Tn
1845 Posts

Profile of Darkwing
Question to folks doing Snowstorm in China. I use the fan that you can get from Michael P. Lair or Mondo Magic. Have any of you had problems with the tine of the fan breaking or the rivet holding the fan together coming apart?

Have any of you found other sources for asian fans that will hold up for stage usage?
hugmagic
View Profile
Inner circle
7353 Posts

Profile of hugmagic
Dave,
I have another guy here at the convention that has them. I will check them out for you tomorrow.

Richard
Richard E. Hughes, Hughes Magic Inc., 352 N. Prospect St., Ravenna, OH 44266 (330)296-4023
www.hughesmagic.com
email-hugmagic@raex.com
Write direct as I will be turning off my PM's.
Christopher Lyle
View Profile
Inner circle
Dallas, Texas
5698 Posts

Profile of Christopher Lyle
Honestly...I HATE using a handheld fan. They never made sense to me. I have some work on another idea. PM me if your at all interested...
In Mystery,


Christopher Lyle
Magician, Comic, Daredevil, and Balloon Twisting Genius
For a Good Time...CLICK HERE!
Michael Baker
View Profile
Eternal Order
Near a river in the Midwest
11160 Posts

Profile of Michael Baker
Quote:
On 2009-04-18 00:14, Christopher Lyle wrote:
Honestly...I HATE using a handheld fan. They never made sense to me. I have some work on another idea. PM me if your at all interested...


Well, following the title of "Snowstorm in China", the fan does make sense. But of course, that doesn't prevent other ideas from being used, as well! Smile

As with anything else we as magicians use, attention to detail and the ability to override the mind's desire to do what has always been done does wonders for truly defining a character that makes sense.

Back when I was using the snowstorm, I was buying inexpensive bamboo and paper fans; a few at a time. They were cheap enough that if I broke one, I junked it and started using a new one. Unless you want to do some fancy fan juggling and need a good quality fan, this is an option.
~michael baker
The Magic Company
indomagic
View Profile
Special user
939 Posts

Profile of indomagic
Yes I do have problem with breaking rivet of the fan. Recently I just got the replacement fan from local gift store, and they are available in many colors black, blue, yellow, red. I just bought some for spare....
Brent McLeod
View Profile
Inner circle
New Zealand
1669 Posts

Profile of Brent McLeod
Plenty of spare Handheld fans around but always check there tight around the base & nut etc

I have 3 Fans but only have used 1 for a few years now-Great effect I love the Snowstorm! Use it in many corporate shows we do at Hotels etc..

One of the best Snowstorms Ive ever seen not using a hand held fan was at a packed Comedy club
here in Auckland & the performer after a Hilarious mime act of comedy & interaction etc

For his finale he had a helmet with a large automatic electric fan-huge thing-taped to the helmet & bought a series of running gags together & had a singing rubbish bin each time it was opened-you had to be there!!! -grabbed some paper & finished with the paper dipping into his drink, starting the Fan & a Huge snowstorm covered the crowd!!-It got a standing Ovation as we were laughing so much but the effect as something different for snowstorm was brilliant in its conception!!!!

His act has won many awards!!
hugmagic
View Profile
Inner circle
7353 Posts

Profile of hugmagic
Ok, I checked with a dealer at the convention on the fans. Here is the dope.

Almost all the guys are getting their fans from the same source. Yes, the rivets break. Replace them with a small machine screw and nut. Put a drop of super glue on the nut to keep it from loosening.

Now for the breaking of the ribs. Buy two fans. Take the two outer most ribs at each end and make them double thickness. Glue two ribs together back to back, so they have double the strength. Now assemble with the machine screws.

Hope that helps a bit.

Richard
Richard E. Hughes, Hughes Magic Inc., 352 N. Prospect St., Ravenna, OH 44266 (330)296-4023
www.hughesmagic.com
email-hugmagic@raex.com
Write direct as I will be turning off my PM's.
disneywld
View Profile
Special user
Denver, CO
614 Posts

Profile of disneywld
I get mine from Chinese shops - where they sell figurines, tables and the like. They come in all colors and sizes - some as much as $200.

My fan is about $25, wide and has lasted over 10 years.
The Magic of Christopher Manos
www.safetymagicshows.com
Sam Sandler
View Profile
Inner circle
2485 Posts

Profile of Sam Sandler
I too have used the standard fan I get my own for a source but I h ave discovered the problem is not so much the fan but How you hold it. when I first started performing the effect I broke a fan almost every other month. I really liked the fan as you can do a cool flip with it (did not like the dragon so got rid of that)

so I worked on it and by changing my grip I solved the problem.

the fan I am currently using has seen almost 1000 shows.

so the lesson here is change your grip. you need to hold the bottom a bit tighter and more of the bottom of the fan needs to be in your hand. also it is not so much a waving back and forth to make the snow go up it is more of a snap one direction kind of move. hard to explain but I can tell you that after 3000 performances of the snow storm if you do this it will solve your problem.

of course it is plastic and anything can happen but work on it and good luck.

on a side note what kind of snow do you use?

sam
sam sandler- America's only full-time DEAF Illusionist
http://www.samsandler.com
http://www.deafinitelymagic.com
Darkwing
View Profile
Inner circle
Nashville Tn
1845 Posts

Profile of Darkwing
Sam,

I have been using Larry Maples and Mondo Magic snowstorms for years and love them. Recently, I have been using Seo Magic's loads and have noticed they are very well made so I am know sold on those. As a side note, I absolutly hate the ones from India. They are loaded so tightly it takes a lot of pressure to break the load so you start the snowstorm.
Sam Sandler
View Profile
Inner circle
2485 Posts

Profile of Sam Sandler
I too used the larry maples snow and they are very good BUT no comparison to Seo magic storms.
I agree the ones from india are awful however I do occasionally buy the multi colored ones and then break them up and use as confetti in other props like when I produce a silk or something like that.

good luck with it and if you have any questions about hte snowstorm feel free to ask Ihave bee performing it for over a decade and perform it at least 20 times a month so I have a little experience with it:)

sam
sam sandler- America's only full-time DEAF Illusionist
http://www.samsandler.com
http://www.deafinitelymagic.com
Nedim
View Profile
Elite user
istanbul/turkey
444 Posts

Profile of Nedim
Hi,

I had the same problem years ago. And I think I found the best fan for snowstorm effect. You can find in Stevens Magic Emporium easilly. http://www.stevensmagic.com

good luck,


Nedim Guzel
JNeal
View Profile
Inner circle
I used to have 999 posts, now I have
1444 Posts

Profile of JNeal
In addition to the cheap (and not so cheap) Chinese fans you might try using a Japanese Dancing Fan. The Dancing Fan tends to have fewer ribs than the Chinese Fans and the ribs themselves are of thicker and stronger bamboo.

Opening a Japanese fan is more difficult initially, because it is rather stiff and the material between the ribs is stiff paper that lasts for years. I've never had the rivet break on the japanese fans I've used , but Richard is correct in replacing the rivet with a small machine screw and after putting the nut inplace, seal the end with epoxy or crazy glue.

BTW- One can make a tremendous gust of wind with the Japanese fan given it's overall smaller size. I've used both and prefer the japanese fan.
visit me @ JNealShow.com
Lord Freddie
View Profile
Inner circle
1093 Posts

Profile of Lord Freddie
The method I have is the Kovari version. The little platic rivet that holds the egg to the fan broke long ago and I haven't got round to fixing and cannot find the suitable materials to do so.
Payne
View Profile
Inner circle
Seattle
4572 Posts

Profile of Payne
Go to a martial arts store and buy a war fan.
https://www.themartialartsstore.com/Cata......_Count=2

These have steel ribs, open easily with one hand (they make a great snapping sound as they do) and generate a huge amount of breeze.
"America's Foremost Satirical Magician" -- Jeff McBride.
B Hackler
View Profile
Special user
778 Posts

Profile of B Hackler
Does anyone know the quality of the fan that comes with Andy Amyx snow storm effect? I have looked at purchasing the effect but can't find a review.
Brent McLeod
View Profile
Inner circle
New Zealand
1669 Posts

Profile of Brent McLeod
Quote:
On 2009-04-28 21:42, hugmagic wrote:
Ok, I checked with a dealer at the convention on the fans. Here is the dope.

Almost all the guys are getting their fans from the same source. Yes, the rivets break. Replace them with a small machine screw and nut. Put a drop of super glue on the nut to keep it from loosening.

Now for the breaking of the ribs. Buy two fans. Take the two outer most ribs at each end and make them double thickness. Glue two ribs together back to back, so they have double the strength. Now assemble with the machine screws.

Hope that helps a bit.

Richard


Fantastic advice Richard-Thanks

I too always have a set up with nut & screw- thanks for the tips on the ribs -appreciated.

Brent
The Magic Cafe Forum Index » » Finger/stage manipulation » » Snowstorm in China Fan Problems (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2020 Steve Brooks. All Rights Reserved.
This page was created in 0.13 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL