The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » Boxes, tubes & bags » » Replacing Labels on Multiplying Bottles (0 Likes) Printer Friendly Version

 Go to page [Previous]  1~2~3 [Next]
Aaron Smith Magic
View Profile
Inner circle
Portland, OR
1457 Posts

Profile of Aaron Smith Magic
Does anyone know where to get the martini labels? I looked at Terry Elton's site, however it seems that the pictures on his site were not loading properly. So I could not see what his labels looked like. Does anyone have a resource on these? Thank you. Smile
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
Quote:
On 2009-09-05 18:03, Aaron Smith Magic wrote:
Does anyone know where to get the martini labels? I looked at Terry Elton's site, however it seems that the pictures on his site were not loading properly. So I could not see what his labels looked like. Does anyone have a resource on these? Thank you. Smile


Real Martini Labels can only be gotten if you purchase a set that comes with them.

The closest you can purchase is from Norm Neilsen Magic http://nnmagic.com and go to his Vanishing Bottles. He sells the Martini Labels separately.
Ron Reid
View Profile
Inner circle
Phoenix, Arizona
2733 Posts

Profile of Ron Reid
Hi Aaron:

I buy quite a few labels on ebay. If you do a search under "bottle labels", you'll be amazed at the size of the market. There are tons of collectors and sellers.

Ron
Neznarf
View Profile
Inner circle
NY then AZ now
1840 Posts

Profile of Neznarf
A video guy told me this. (long time ago)

To remove VHS label...appply "Baby Oil", let it soak in and peel ir right off.

It works!
"Life is not about waiting for the storms to pass...it's about learning how to dance in the rain."
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
I too have the uday bottles, the aluminum work seems fine, but the labels are terrible. after lots of thought I have decided to redo them as martini labels. this is a very recognizable bottle, the design of the label is nice, vermouth is the right color for dark brown or black, and the red ring works for a sealed top look.

I like the attached version, it is not the most current, but more modern than older ones which are a bit baroque. so I am reconstructing this label a piece at a time as very high resolution line art & jpeg images. I will provide a link to them when they are ready. I think that printing with a bubble jet will look great, I plan to scale the images by bottle size.

Click here to view attached image.
61magic
View Profile
Special user
Sacramento California
783 Posts

Profile of 61magic
Here are additional labels I found that are perfect...
http://www.themagicofterryelton.com/new_page_1.htm

JC
Professor J. P. Fawkes
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
Hi jc, I looked at those, but they are all different. I guess I don't understand how that works for the multiplying bottles, because the bottle & glass switching part doesn't work... can someone explain that?
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
Quote:
On 2009-10-16 12:53, billappleton wrote:
Hi jc, I looked at those, but they are all different. I guess I don't understand how that works for the multiplying bottles, because the bottle & glass switching part doesn't work... can someone explain that?


If you are seriously interested then email Terry Elton, he can answer this better then anyone else. I do not know if this is selection of labels to pick from or duplicates are included. He is a professional and performs the bottles regularly.
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
All right, here is the first pass at my graphics for the classic Martini bottle. I will see how they print later on. There are 3 parts, the top red wrapper, the middle neck label, and the main bottle graphic. They are very large and should be used with a common percent reduction for full page label stock.

http://www.dreamfactory.com/magic/top_wrapper.jpg
http://www.dreamfactory.com/magic/neck_label.jpg
http://www.dreamfactory.com/magic/main_bottle.jpg
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
One problem with the Martini Labels is that they have gold on the label. Thus you need a very good scanner and editing program and a printer that prints with metallic inks.

The cost is not worth making them yourself.

The label on the above bottle is not what we have in the midwest liquir stores. They are just like the labels on the Multiplying Martini Bottles from India and the new bottles at http://www.stevensmagic.com
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
This thread is about replacing existing labels that look bad, not spending $450 bucks to buy new ones. Process color and embossing would still require high resolution graphics to start with. Those martini bottles haven't bold sold for years, they are at least three designs changes old.
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
Not in my liquor store.
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
Removing the Uday labels was pretty easy, I used the hair dryer method, and goo gone to wipe away the left over glue. those labels are pretty tough plastic or mylar, they came off in one piece.

I've painted the bottles a dark glossy brown to better match vermouth.

Having some trouble finding adhesive full sheet glossy paper to print the new labels on, will update this thread as results come in...
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
I find it interesting billappleton mentions that the bottles are brown, here in Indiana the Vermouth bottle is green. I ordered a Martini Bottle from Norm Nielsen years ago and it came as a brown bottle. When I seen him at a convention, I ask why he sent me a brown bottle he said that was the Martini bottle color in Europe. I thought, you sent it to a U.S.A. address. Then later I seen that he now makes them in bottle green as I am use to seeing.

So I guess in different parts of the country, the labels and bottle are totally different. Just an observation.
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
You are right, they are green. I guess the vermouth makes them look brown-ish, here is a cool page you can also see all the style changes in these mini bottles:

http://www.abbottles.ru/?{5a9ad3ab-b0fc-......4c0}.htm
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
I had lots of trouble finding the right paper for printing that is:

1) full page 8.5 x 11
2) glossy paper
3) for ink jet printing
4) pretty thin & flexible

Here it is:

http://www.brownkraftlabels.com
8 1/2 x 11 Rectangle Full Sheet White High Gloss Label Sheet

68 cents a sheet...
Christopher Starr
View Profile
Inner circle
Heart of America
1850 Posts

Profile of Christopher Starr
I have not tried them, but a label company called NEATO offers a series of printable labels that they say are suitable for beer or wine bottles. The link is:
http://www.neato.com/catalog/Bottle,16.htm

or Click Here for the link, as the comma in their link doesn't make it work correctly.
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
Here are the results of painting & printing. The labels worked fine, although the backs were hard to remove. I scaled the labels by bottle size, this was tough because the neck on the smallest bottles gets really small. I will add a link to the 4 msft word files I used for printing later on, these are the right size for printing on the Uday bottle.

Bonus points for painting the inside top flat red. This makes the bottles more deceptive when viewed from above. Although you need to think about the bottom angle as well. I gave up on the "neck" labels, I was worried about wear and tear. So I incorporated the neck logo into the top seal. I clear-coated these with a krylon acrylic gloss for protection & more glassy look.

Click here to view attached image.
billappleton
View Profile
Inner circle
Los Gatos, California
1154 Posts

Profile of billappleton
Here is a zip file containing the msft word documents to print the labels for the four Uday bottle sizes, there are 2 labels per file. So you would only need to print the four files at 8.5 by 11.

http://www.dreamfactory.com/magic/labels.zip
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22788 Posts

Profile of Bill Hegbli
You did an expert job, they look very nice. You should be proud of your work.
The Magic Cafe Forum Index » » Boxes, tubes & bags » » Replacing Labels on Multiplying Bottles (0 Likes)
 Go to page [Previous]  1~2~3 [Next]
[ Top of Page ]
All content & postings Copyright © 2001-2026 Steve Brooks. All Rights Reserved.
This page was created in 0.04 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL