We Remember The Magic Café We Remember
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » Latest and Greatest? » » Lots of metal bending here...and priced way too low (0 Likes) Printer Friendly Version

The Baldini
View Profile
Inner circle
I some how pounded in
2416 Posts

Profile of The Baldini
Here is a link for a bending spoon, where a spectator is allowed to examine, and then use it to stir her coffee, you gesture and use the magic words, when she removes it, it has a 90' bend, and it is still examinable. Under 40 bucks in the US, Also a spool of wire you can make your own designs, paper clips and springs too.


http://www.grand-illusions.com/acatalog/Nitinol.html
The Baldini
View Profile
Inner circle
I some how pounded in
2416 Posts

Profile of The Baldini
Over 100 view in such a short time, and no opinions, comments .
Ustaad
View Profile
Inner circle
Iindia - States
5717 Posts

Profile of Ustaad
Nice find. Thank you.

The spoon looks quite nice as well.

Worth considering.

Smile
MAGIC is a SECRET, without the SECRET there is no MAGIC.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke.
Pakar Ilusi
View Profile
Inner circle
5715 Posts

Profile of Pakar Ilusi
Them other things there are way cool...

The spoon itself is not that great imo as you have to put it in hot water.

Kinda gives it away for me...

Smile
"Dreams aren't a matter of Chance but a matter of Choice." -DC-
Ustaad
View Profile
Inner circle
Iindia - States
5717 Posts

Profile of Ustaad
Quote:
On 2011-02-11 08:39, Pakar Ilusi wrote:

The spoon itself is not that great imo as you have to put it in hot water.

Kinda gives it away for me...


That's just one of the methods of making the spoon to bend.

Knowing the typical characteristic of the metal, the spoon can be made to bend using various other methods including rubbing the stem of the spoon at the appropriate place.

Smile
MAGIC is a SECRET, without the SECRET there is no MAGIC.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke.
Pakar Ilusi
View Profile
Inner circle
5715 Posts

Profile of Pakar Ilusi
I know that Ustaad, just commenting on their suggested performance.

I myself prefer using normal spoons...
"Dreams aren't a matter of Chance but a matter of Choice." -DC-
The Baldini
View Profile
Inner circle
I some how pounded in
2416 Posts

Profile of The Baldini
A word of caution, if you buy the wire and use nails to create the form or template as suggested by the seller, and then use a torch, also suggested by them, be sure you do not start a fire on the wood holding the nail and wire, perhaps use some sheet metal on top of the wood, you can buy it at any local hardware store and it is very easy to drive a nail thru the sheet metal and in to the wood, you can also find very inexpensive propane torches.
the Sponge
View Profile
Inner circle
Atlanta
2672 Posts

Profile of the Sponge
Quote:
On 2011-02-11 08:23, dave wrote:
Over 100 view in such a short time, and no opinions, comments .

this was found and posted before.
The Baldini
View Profile
Inner circle
I some how pounded in
2416 Posts

Profile of The Baldini
Sponge, I was unaware of the rule that says we cannot start up a thread again, and to think I was going to ask about peek wallets next, don’t get mad, I’m just teasing, it is a fresh thread for those of us who have not seen the original or perhaps some new changes came up since the old one.
Cyberqat
View Profile
Inner circle
You can tell I work on the net from my
2209 Posts

Profile of Cyberqat
That's a fun site in general, thanks for pointing it out!
It is always darkest just before you are eaten by a grue.
the Sponge
View Profile
Inner circle
Atlanta
2672 Posts

Profile of the Sponge
Quote:
On 2011-02-11 11:04, dave wrote:
Sponge, I was unaware of the rule that says we cannot start up a thread again, and to think I was going to ask about peek wallets next, don’t get mad, I’m just teasing, it is a fresh thread for those of us who have not seen the original or perhaps some new changes came up since the old one.

I didn't say there was a rule, nor was I passing judgement. You just wanted comments so I gave you one, and since you seemed sad/surprised on the lack of posts, I gave you my thoughts on perhaps why this thread may not be hopping--perhaps a lot of people have already posted on it eariler or feel it has been discussed? dunno.

s
The Magic Cafe Forum Index » » Latest and Greatest? » » Lots of metal bending here...and priced way too low (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2021 Steve Brooks. All Rights Reserved.
This page was created in 0.11 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL