|
|
steve-pistolas New user UK 67 Posts |
Hi ive managed to get hold of 2 of rolling banners (sprung loaded barrel pull up) which already have a design on it, can I paint over them and if so which kind of paint should I use and has anyone tried doing this, thanks for any advice you may have
|
Jim Hand Regular user Ocala,Fl. 137 Posts |
It all depends on the material the banners are made of.....if they are vinyl the answer is yes they can be repainted...but you need to use a vinyl ink for the job...Vinyl ink is available from a company called NAZ-DAR...google them for a dealer near you....so far so good...now the bad part...vinyl ink is meant for silk screening but it can be thinned down with laqquer thinner and brushed on ,I do it quite often on banners and backdrops. The ink is available in many different colors but is VERY PRICEY ,about 40-60 dollars (us) a quart...You should work outside with it because of STRONG fumes...Your best and cheapest bet would be to go to a local digital sign shop and have new banner made and attached to the hardware.....
|
steve-pistolas New user UK 67 Posts |
Hey Jim, thanks for your advice yes I will look into maybe getting a new print cheers
|
The Magic Cafe Forum Index » » Believe it or not... » » Rolling banners (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |