|
|
Go to page [Previous] 1~2~3..10..17..24..31..35~36~37~38~39..46~47~48 [Next] | ||||||||||
WizTom New user 74 Posts |
I just recharged "VAPR" at my computer / USB. The charging has taken about 30 /40 minutes. Works perfectly. I'm excited!
Conclusion: Highly recommended! |
|||||||||
Danny Kazam Inner circle 1516 Posts |
Quote:
On 2013-12-13 07:53, Masta Ace wrote: If you are fine using the bulb, then I don't see any reason to change. Having now seen and played with Vapr, and have also owned SmokeV2 for 2 years. I personally prefer Smoke V2. I like the set up I have withbmy jacket that makes moving the bulb to and from my arm pit easily. I also like that I can use SmokeV2 without sleeves.
Keep your dreams alive. Understand to achieve anything requires faith and belief in yourself, vision, hard work, determination, and dedication. Remember all things are possible for those who believe.
|
|||||||||
Flyswatter Veteran user 370 Posts |
I'm still on my first cartridge...I don't really understand how to replace the cartridge still...do you PULL it out and PUSH it back in? Without twisting?
|
|||||||||
max88 Loyal user 280 Posts |
Quote:
On 2013-12-13 19:46, Flyswatter wrote: yes it is. See my review two page ago for other tips in case you need charge. |
|||||||||
Alex DLF Inner circle 1992 Posts |
There is some noise but you won't be able to hear it in working conditions you can hear if you are alone, with really no noise around you.
Get yourself Stamper and MONU, the perfect walkaround packet tricks: https://youtu.be/rwtfeKFeLms & https://youtu.be/yz5yKlI-4w8
Make sure to check my English review Channel! http://www.youtube.com/c/alexisreviews |
|||||||||
Jacopo New user Italy 30 Posts |
Quote:
On 2013-12-14 00:36, Alex DLF wrote: Thanks! I'm looking to buy it! |
|||||||||
cricketer15 Loyal user Sydney, Australia 248 Posts |
I use this on the streets and bars, you can't hear anything. Even in library, the shirt and sleeve covers up a lot of the noise.
Anything is Possible
|
|||||||||
WizTom New user 74 Posts |
Same here. Shirt and Jacket covers the noise good! I also wrapt some black tiny foam around the main unit. Helps!
|
|||||||||
Dentian Loyal user 278 Posts |
Just two quick things I've found/confirmed with VAPR:
1. You can charge charge at 240V, I've tried it, no problem. No need to worry about it. 2. If you have cartridges from other smoke devices, you CAN use them with VAPR. In fact, I found that the consistency and thickness of the smoke is equivalent to a VAPR cartridge when I used a Pure Smoke cartridge. |
|||||||||
cricketer15 Loyal user Sydney, Australia 248 Posts |
Anyone else get some smoke smell sometimes lol? or is it just the heater coil doing that? normal?
Anything is Possible
|
|||||||||
Ustaad Inner circle Iindia - States 6157 Posts |
In these 25 pages some good ideas/ discussion/ review(s) have come forth. Said that:-
I humbly feel that the atomizer with its long stiff tube (i.e. the 'atomizer') should not have been placed at one end of the device. This sort of a design will create more of a problem (during performance) for the performer. However with a slight change in the design of the delivery tube (that includes the flexible as well as the atomizer tube) the contraption can be made much easier to use as well as have an added advantage of flexibility while in use. I would therefore suggest that, instead of having the atomizer tube at one end, the atomizer tube should be placed somewhere in the middle with an extra piece of flexible tube attached to the outlet of the atomizer which goes to the palm of the hand. Just the way I think this device should have been designed. If you like the suggestion - implement it; else just forget about it and continue working with the original device. However those who have practically used the Vapr device will agree to my above suggestion and would have realized its advantage(s) over the original design. Thank you.
MAGIC is a SECRET, without the SECRET there is no MAGIC.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke. |
|||||||||
Dentian Loyal user 278 Posts |
Ustaad, that is a valid point, and you can re-model your device to work that way. Simply cut the original tubing down and then add the longer portion of the tubing to the front of the atomizer (feed it into the cartridge). If you don't want to cut your tube, then simply get some additional tubing (I used the one I got from S.S.S by Shin Lim) and feed it into the hole of the cartridge.
|
|||||||||
Tom Cutts Staff Northern CA 5925 Posts |
I like the thinking but my untested concern would be dripping. The longer the last tube, the greater the chance of internal condensation, which could lead to dripping over time.
Again this theory of mine is totally untested. |
|||||||||
Danny Kazam Inner circle 1516 Posts |
Very interresting. I won't say why Vapr is built like that, but if one wants to take your advice, they would be altering it to be more like Smoke V2, but without the electric air pump and remote. Anyone who has ever taken apart an e-cigarette will find that most atomizers are in the cartridge, and the rechargeable battery is what is inside the tube, plus the LED light that lights the end of it when you inhale.
Quote: On 2013-12-15 06:33, Ustaad wrote:
Keep your dreams alive. Understand to achieve anything requires faith and belief in yourself, vision, hard work, determination, and dedication. Remember all things are possible for those who believe.
|
|||||||||
Ustaad Inner circle Iindia - States 6157 Posts |
Quote:
On 2013-12-15 10:40, Dentian wrote: In my previous post I should have made it clear that I personally do not have Will Tsai's 'Vapr' (but my friend has one and I have played with it enough). I have made my own contraption based on Shin Lim's 'S.S.S' but with certain modifications so as to have greater control over the smoke. Briefly the two modifications are:- (a) Used a larger size bulb (purchased from DealXtreme, Hong Kong) (b) Used two detachable plastic snouts (nozzles) with tubing of different diameters attached at the end of the main outlet tube. This helps in controlling the smokes outlet pressure (the larger the diameter of the outlet tubing lesser the outlet pressure & vise-a-versa). Thus one can pump out smoke very smoothly and evenly or blow smoke with a slight force - Well don't you agree that one has a choice there?! My very personal & humble opinion about this kind of a device is that the working method should be simple, easy and smooth but at the same time foolproof; and hence I PERSONALLY prefer Shin Lim's device as against the so called high-tech device by Will Tsai. Though many have said that the noise level in Will's device is at an acceptable level but I have to humbly disagree with my dear friends. The Smoke Effect, as I perceive, is basically a close-up as well as one-on-one effect and the nose generated by the pump is certainly not at any acceptable level. This becomes slightly more prominent when the battery is fully charged. I certainly do understand the difference between a 'Hum' and 'Vibrating noise' - This is the natural vibrating noise created by the pump. On this I would not like to get into any kind of debate. Thank you. As for the high-tech part, I personally feel that using a remote is not a necessity when the device is hooked on to one's body, but nevertheless it is a nice add-on if one needs to control the smoke when the device is not placed the body. Somebody had mentioned (I read it here somewhere) that the remote can be activated hands-free by placing it in the sock of one leg and pressing the switch with the help of the other leg. This is certainly a very good idea and I would like to further build on this idea. It would be nice if a tiny Reed Switch could be placed inside the remote and connected in parallel with the remote's switch. Thus one can very easily activate the remote by placing it in the sock of one leg and on the other put a magnet of suitable strength. This just a thought/ idea. Quote:
On 2013-12-15 11:21, Tom Cutts wrote: As already mentioned above, I have been using my own contraption based on Shin Lim's method. This IMO is the worst case scenario where the flexible tubing begins from one end (the bulb end) and goes down to the palm. But so far I have never faced the problem of condensing vapor. I have used the device in extreme humid and cold conditions (in WA State) but never found any condensation/ water droplet in or outside the tube. This probably may be due to the vapor being forced out and also due to the small quantity of vapor being generated. So I think one needn't worry about this aspect. Quote:
On 2013-12-15 22:59, Danny Kazam wrote: This is exactly how the Shim's S.S.S. has been constructed. IMO, S.S.S. is one of the simplest and most effective device that I have been playing around with (but, of course with my little modifications ) and is much better than Smoke V2 (i.e. once gain in my personal opinion ). I have said what I had to - Just my thoughts - Ideas - Opinion . I might not come up to answer any further queries in this regard. Thank you for your time and enjoy your ‘Vapr’.
MAGIC is a SECRET, without the SECRET there is no MAGIC.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke. |
|||||||||
2012multimagic Loyal user 241 Posts |
Wow... this thread continues lol... just want too say that my vapr (2/3 weeks owned) is working perfectly ..NO noise issue whats so ever when actually performing with it. Ive sewn a small “loop’ in the side of my sleeve that holds the device (instead of the arm band), it frees up your wrist and seems to elevate the smoke right too the end of your fingers and beyond...
hey guys !!!... looking forward to joining this community.. some WILL hate me.. some MAY love me ... enjoy !!!...
www.youtube.com/2012multimagic www.twitter.com/2014multumagic www.instagram.com/illusions2015 |
|||||||||
Stucky Inner circle I'm Batman! 1355 Posts |
Ustaad sure is one "humble" dude.
Official Thread Killer
|
|||||||||
Masta Ace New user 46 Posts |
Quote:
On 2013-12-13 19:45, Danny Kazam wrote: Ok, great, thank you for the reply. |
|||||||||
Danny Kazam Inner circle 1516 Posts |
Ustaad, I always admire your honesty of opinion. I have also appreciated the time you have given to me in answering my questions throughout the years.
Masta Ace, no problem. Glad to share my opinion
Keep your dreams alive. Understand to achieve anything requires faith and belief in yourself, vision, hard work, determination, and dedication. Remember all things are possible for those who believe.
|
|||||||||
Ustaad Inner circle Iindia - States 6157 Posts |
Dear Danny Kazam, Thank you so much for the kind words. I always look forward to reading your very well written thoughts here on the Café.
Thank you. Best regards, Narendra
MAGIC is a SECRET, without the SECRET there is no MAGIC.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke. |
|||||||||
The Magic Cafe Forum Index » » Latest and Greatest? » » Vapr by Will Tsai » » TOPIC IS LOCKED (76 Likes) | ||||||||||
Go to page [Previous] 1~2~3..10..17..24..31..35~36~37~38~39..46~47~48 [Next] |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.08 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |