|
|
|||
|
SDR Elite user 430 Posts
|
Howdy
Is there anywhere I can get an relatively in expensicve copper silver coin with two matching coin in dollar size? I want to start doing some effects I'm doing close up with my half dollar sized coins at tables and would like bigger coins. Any advice? |
|
Rob Johnston Inner circle Utah 2060 Posts
|
There was a string about this earlier. Check it out. There are not too many but there are a few the size you are asking for.
"Genius is another word for magic, and the whole point of magic is that it is inexplicable." - Margot Fonteyn
|
|
FCpreacher Elite user PA 439 Posts
|
|
|
leefoley3 Elite user Texas 402 Posts
|
Shaun, Try Brad Burt (www.magicshop.com). I believe he's having some made. I don't know about price but I know that if he has any control over it (and in this case he does) he will make it a good deal. Note: I did not say 'cheap' but you will get a quality product that is guaranteed personally by Brad. I'd bet my last dollar that if you don't abuse it, it will last a lifetime.
By the way, I do not work for Brad or recieve ANY benefits by mentioning his products or shop/website. Good luck ![]()
In December of '06 I was diagnosed with a very rare cancer, Dermatofibrosarcoma Protuberans. One in a million people worldwide are diagnosed with this type of cancer annually. Sarcomas account for 1% of all cancers. Knowledge is power!
|
|
Liam Jones Veteran user 384 Posts
|
|
|
Sk8rDave Regular user California 189 Posts
|
With regards to Sasco's stuff, I've been very unhappy with their quality in the past.
|
|
harris Inner circle Harris Deutsch 8834 Posts
|
Does anyone make a C/s with a Sadbury Dollar size penny?
Harris
Harris Deutsch aka dr laugh
drlaugh4u@gmail.com music, magic and marvelous toys http://magician.org/member/drlaugh4u |
|
Allan Elite user 405 Posts
|
While you can always have one made, I checked with Todd Lassen because I wanted him to make one for me. He said that the problem was a dollar size copper coin was hard to get. He also said that because of the size, it would be quite easy for the spectator to see the split.
Hope that helps. |
|
Dan Watkins Inner circle PA 3034 Posts
|
I emailed Todd about the beautiful coins, but I have yet to hear back from him. I can't wait to see them, I have a boat load of his coins, top notch stuff.
|
|
Bill Hegbli Eternal Order Fort Wayne, Indiana 22791 Posts
|
The answer to your question is NO you cannot get an inexpensive C/S dollar coin. Maybe some of these people that have too much coin magic would give you one. C/S dollar coins were only produced many years ago with a centenial coin that was a Jumbo Penny they were made of solid copper.
Also years ago the Chinatown Coin was made in dollar size. The only problem is you will need matching coins of whatever coin is used. Bill |
|
Jonathan Townsend Eternal Order Ossining, NY 27469 Posts
|
There are some VERY nice large Chinese coins out there on ebaY. There is a REAL Chinese 4 inch coin available. The larger coins were more like round ingots or mounds with symbols on the flat bottom. They are available too. in SILVER. Doubloons are about silver dollar sized. Might be much more classy to use gold doubloons than silver dollars for some routines.
...to all the coins I've dropped here
|
|
Bill Palmer Eternal Order Only Jonathan Townsend has more than 24330 Posts
|
Quote:
On 2004-01-30 20:11, wmhegbli wrote: These copper coins were the Sudbury copper cents. Brad Burt has them in stock. Johnson has made the C/S coins with them in the past. But you are right. They have NEVER been inexpensive. Although Todd Lassen is really good at what he does, probably the best, there is a way to make this coin so that it is deceptive.
"The Swatter"
Founder of CODBAMMC My Chickasaw name is "Throws Money at Cups." www.cupsandballsmuseum.com |
|
Bill Hegbli Eternal Order Fort Wayne, Indiana 22791 Posts
|
Bill,
I had a friend look for a long time for the Sudbury Coin and finally found one. Yes, Johnson made them. Shaun, even if you are in the UK it might want to get a couple of these dollar size coins and have them made in your country or I know Johnson Products will make custom coin work on by request. You have some very fine coin makers in the UK, you might want to check with them. Bill |
|
Bob Johnston Inner circle Philadelphia, PA 1251 Posts
|
Todd Lassen just got some beautiful Copper coins (more than one kind) to use with Silver Dollar size coins. He is making me a Hopping Half in that size. He also makes a wonderful Chinatown “Half” in Silver Dolor that looks great.
I just got his C/S/Brass in Silver Dollar size and it looks great. The brass coin he used was from Al Schneider, and is a perfect fit. Bob |
|
iamslow Inner circle Proffessional Slacker 2012 Posts
|
Yo might also want to contact roy keupers, as his prices are excellent... I think the biggest problem is finding the copper coin of that size, but I'm sure if you contact him, he might be able to make you a custom one for a lot cheaper than lassen...
"Everyone has a plan till they get punched in the face" Mike Tyson
|
|
Bill Hegbli Eternal Order Fort Wayne, Indiana 22791 Posts
|
The Book "Coins of Ishtar" by Jules DeBarros, is a really interesting use of 2 copper silver coins. Also has interestig ideas with the Chinatown coin.
Bill |
| The Magic Cafe Forum Index » » Nothing up my sleeve... » » CS Dollars? (0 Likes) | |
| [ Top of Page ] |
|
All content & postings Copyright © 2001-2026 Steve Brooks. All Rights Reserved. This page was created in 0.03 seconds requiring 5 database queries. |
|
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement <
![]() |