New bench top
http://i177.photobucket.com/albums/w221/......gubb.jpg
underside back
http://i177.photobucket.com/albums/w221/......tctu.jpg
http://i177.photobucket.com/albums/w221/......dihw.jpg
THRONE new size
http://i177.photobucket.com/albums/w221/......zpz4.jpg
side
http://i177.photobucket.com/albums/w221/......ktad.jpg

With the new slides and the paint I am now at my budget of $150. so anything else now will be going over budget.

Gotta love all those drawer slides!

The Throne looks amazing. That gold paint made it all come together.

Not much time this week. I may work of the roller shade this week. Started looking around for parts for the skull Throne skin, with a budget of 0 it will be just what I can find around here ( I will post a pix of what I find).

Junk I found here to use for the skull Throne skin.
http://i177.photobucket.com/albums/w221/......70tj.jpg
and
http://i177.photobucket.com/albums/w221/......a86y.jpg
Yes I have a plan of action.

I got this Mirror Frame for free (it is the excact same one that is on my Wizard Throne) because the mirror was shattered and the ornate top was broken off. I will be using the bottom for the top and adding on some junk to make my own top.
http://i177.photobucket.com/albums/w221/......ks40.jpg

This is how I junked up the top of mine --- all scraps from the bed head board.
http://i177.photobucket.com/albums/w221/......lbpi.jpg

I put some more stuff on the top of the frame
http://i177.photobucket.com/albums/w221/......j98r.jpg
Also got the sides cut out.

Http://i177.photobucket.com/albums/w221/......kcax.jpg

I have really been enjoying your progress building in your Satan's Seat!...

Falconer

Computer broken should be fixed on Wed. will post some pictures then.
I did get the whole Villain Throne (SKIN) cut out and put togather --- Looks very cool.

This is what I am thinking on this--- One Throne with 2 skins and 4 looks (themes)
Hero Throne Skin (gold ornate curved lines) for Santa, Magician/Wizard and King
Villain Throne Skin (dark very basic chair with stright lines) basic throne for witch (NO Add ons) --add skulls for Skull Throne--add DANGER HIGH
VOLTAGE sign on top back of basic chair for Electric Chair.

This is the villain skin
http://i177.photobucket.com/albums/w221/......vbif.jpg
It will be black with a green patina like I painted my Twister
http://s177.photobucket.com/user/illusio......jpg.html

I got the molding on and a primer and base coat of paint on.

This weekend my plan is to work on the (box that slips over the back top of throne to house the) HIGH VOLTAGE SIGN, the skulls (from the Dollar Store), and get the green patena on the Throne (alot of work).

So far got he sign box done (said I would spend no money but) It is better to buy the DANGER HIGH VOLTAGE sign. also got some work done on the plastic skulls from the dollar store.

The dollar store Skulls start looking like this.
http://i177.photobucket.com/albums/w221/......njnk.jpg
I cut open the eyes and nose and wiped in spray foam.
http://i177.photobucket.com/albums/w221/......7peb.jpg
I sprayed on black paint ( this will melt some of the foam and make it look more like skulls).
http://i177.photobucket.com/albums/w221/......kqeu.jpg
I dry brushed on the green patina.(FINISHED)
http://i177.photobucket.com/albums/w221/......carv.jpg

How I do my DYI roller shades---
first I cut off all of the plastic except 2 inches--- then I draw a line along the edge where the plastic meets the tube (this make it easer to line up and glue the fabric on the tube later on and shows which way it rolls onto the tube).
http://i177.photobucket.com/albums/w221/......3omm.jpg
then I pry off the caps on the working end of the shades and super glue the metal workings to the tube.
http://i177.photobucket.com/albums/w221/......bib4.jpg
More steps later

Roller Shade step 3
If you look close on the working end you will see 2 very small ratches-- you must pry these off (these are the tools I use).
http://i177.photobucket.com/albums/w221/......sabi.jpg

DANGER HIGH VOTAGE sign for the electric chair look done
http://i177.photobucket.com/albums/w221/......pgp6.jpg
and on top of the chair
http://i177.photobucket.com/albums/w221/......6nkc.jpg
I said I would buy the sign but the size I wanted was $35.00 to $50.00 (I guess it has to meet Osha regulations)
So I made my own got picture from internet and printed on some dvd lables I have here then put clear packing tape over the top to hold it in one piece as I peeled it and stuck it (cost nothing). there will also be some electric chair head gear coming off the center middle bottom of sign. On the side there will be a big throw switch (on and off).