The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » F/X » » Trimble Background Screen... (0 Likes) Printer Friendly Version

mdspark
View Profile
Special user
784 Posts

Profile of mdspark
I know this has been discussed some before. But I am in the process of making one of these per instructions from Magic Inc.'s "Success Book"...

Instead of cardboard I am going to use insulation boards..like are used on the exterior walls of houses and storage buildings prior to the outer siding being put in place...This should make a background screen that is very durable as well as light weight..

Anyway, I need some suggestions on a type of covering for the screen. Obviously it would have to be a relatively light weight and wrinkle free type of material. Any suggestions would be greatly appreciated...I also would like to somehow incorporate my name on the background material..but not sure of the best, easiest, and inexpensive way of doing this.

Thanks.
Jeff Haas
View Profile
Special user
932 Posts

Profile of Jeff Haas
Go to one of those quick sign shops, and see if they have anything there that you like. There might be something that would work and look different...they can even make 3D letters for you that could be glued to the backdrop to spell your name.
mdspark
View Profile
Special user
784 Posts

Profile of mdspark
Thanks, Jeff. Anyone out there have a suggestion for a light weight material to hang/cover the background screen?..thanks.
Miracle Man Show
View Profile
New user
Indiana
56 Posts

Profile of Miracle Man Show
For the screen material itself, you might consider Gator board. It is similar to foam core presentation board, but really, really durable. It comes in white, natural, and black. It comes in several thickness up to 2 inches and can be had in 4 x 8 foot sheets. It is not cheap, but will stand up to wear and tear.
Tom McCormick
"The Miracle Man Show"
There's only one Miracle Man, that's Jesus Christ; I just get to do a show about HIM.
www.themiraclemanshow.com
MagicalPirate
View Profile
Special user
Shamokin, PA
828 Posts

Profile of MagicalPirate
For material to cover the screen try felt. It is available in all the local sewing centers. If you are using the standard measurements you will need 5-6 yards of the material. It comes in a variety of colors and is relatively easy to work with. Use the spray on adhesive spray to attach as just work out the wrinkles as you go. Apply 2" double sided tape around the edges and spay adhesive the excess on the back after shaping it to your screen. This is an easy weekend project.

Martin Smile
Martin Blakley, CSH, DASH, CMSA
http://www.thehypnoguy.com/HYPNORESOURCES
http://www.docgrayson.com/
How To Sell Anything Online
http://tub.bz/?r=1z
Copyright to my own words retained 100%.
constantine
View Profile
Regular user
Memphi, on the Mighty Muddy
189 Posts

Profile of constantine
Constatine 49%er
“The way of the transgressor is hard—to quit.”
—Jefferson Randolph “Soapy” Smith
mdspark
View Profile
Special user
784 Posts

Profile of mdspark
Great suggestions...thanks guys...looking forward to hearing anyone else's ideas.
Alan Munro
View Profile
Inner circle
Kentwood, Michigan, USA
6071 Posts

Profile of Alan Munro
I'd make one out of triple corrugated cardboard - it's much more rigid and durable than the stuff Trimble used. I think it's available in 4' X 8' sheets. There is also corrugated plastic which would have the added advantage of being waterproof.
theaterfreak89
View Profile
New user
93 Posts

Profile of theaterfreak89
For the covering, if youre in a big city, try scoping out the fabric district. The prices can't be beat and there are is some really amazing stuff there sometimes.
"...Now lift it up...over your head..."
hugmagic
View Profile
Inner circle
7768 Posts

Profile of hugmagic
Ok, this is method I have been using the past couple of years to cut weight in props.

Get some of the signs they hang outside to advertise pop and such at gas stations or supermarkets. They are usually about 20" x 30" and made with a corregated cardboard that is kind of plastic coated on the outside. Now go to Wallmart, fabric store, or similar store, look for the closeout fabric section. You should be able to buy fabric for $1 to $2 a yard.

Hinges the pieces together with duck tape being sure to leave slack to allow the pieces to lie flat.
Now spray the entire unit with the 3-M spray adhesive. It is expensive but the best stuff out there is.

Now put on the fabric and smooth it down. The fabric should be wrapped around the edges of the board when adhering it. If you have a black or colored duck tape that blends in with your fabric, I would put it on the lower edges and on the backside to secure things and to help with the wear.

If you need to reinforce some areas to stay open or such, try using the heavy duty velcro stick on tape. It is unbelievably strong and secure.

If you take the time to find a good looking fabric, you will have a winner. The fabric wears well and does not reflect light as paint or vinyl can. Get some cheap fabric also to make a good carrybag for the whole unit.

Gatorfoam is ok the surface is a little to delicate. These signs are thrown away at most places so you should be able to get them for nothing.

I found a great black fabric with little silver dots on a 3" pattern for $1 a yard. All my tables, dump boxes and such are covered with it. But let me advise you, if you find the fabric get all they have or you think you will ever need. It is almost impossible to find it again.

Last year at Abbott's, Patrick Page borrowed by dump box to use in his act. He could not believe it was a priority mail box covered with the fabric. Don't laugh it works.
Richard E. Hughes, Hughes Magic Inc., 352 N. Prospect St., Ravenna, OH 44266 (330)296-4023
www.hughesmagic.com
email-hugmagic@raex.com
Write direct as I will be turning off my PM's.
mdspark
View Profile
Special user
784 Posts

Profile of mdspark
WOW.... a lot of great information and tips! Thanks Richard!!!
The Magic Cafe Forum Index » » F/X » » Trimble Background Screen... (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2026 Steve Brooks. All Rights Reserved.
This page was created in 0.02 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL