We Remember The Magic Café We Remember
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » Up in smoke! » » Having problems creating (0 Likes) Printer Friendly Version

Magic74Josh
View Profile
Regular user
Pennsylvania
101 Posts

Profile of Magic74Josh
I am a magician/pyro currently working on creating the special effects to close the American Tribute section of my show. I wanted to use four (Theatre Effects Airbursts) in my set, however, I cannot get it all figured out. I know it doesn't sound hard, but sometimes I can get it to work and sometimes I can't!

I take a teaspoon of flash powder with sparkle additive and put it in a piece of flash paper, put a Surefire igniter in it, and ball up the paper. Once connected to an ignitor, I can get like a 50% success rate with it igniting... it's like if the igniter is in the powder all the way it won't blow up.

CAN I PLEASE GET SOME HELP!!!
Magically Yours,
Magic74Josh
Magic7Josh@aol.com
zigmont
View Profile
Regular user
140 Posts

Profile of zigmont
Josh,

You need a sure fire match, not a sure fire igniter and, only place the tip of the match about 2/5 of the way down from the top. The match needs to give a hot blast and the igniters don't do the job.

What firing controller are you using? The wiring to the airburst from the controller may be too long and it's not getting the voltage it needs. The match needs less voltage/amp.

Zigmont

You will need various licenses/permits with the Bureau of Alcohol, Tobacco & Firearms (ATF) and the State/cities where you live or are performing, and various other localities to allow to import, transport, store, buy, manufacture (mix) and display (shoot) all types of explosives involved in a pyrotechnic display.

You must have a permit from the local authorities having jurisdiction and must pull a permit from the local fire dept. and have scheduled a fire watch with the Fire Marshal's office. That is to have the fire alarms shut off and a fireman on location.

You will need to provide a $1,000,000.00 Class "C" 1.4G Explosives liability insurance policy and that is required on all pyro shoots. This is a policy that is just for pyro and not a general liability policy. You will have to show your qualifications (bio) and show that you're certified with NFPA 1126 national fire codes for Standards for the use of Pyrotechnics before a Proximate Audience. Showing Your Log Book of shows performed to the Fire Marshal's office and the related information of facilities and the MSDS for the effects. Heavy fines and arrest can occur for shooting without being licensed and insured. This can include open flame and smoke machines in some cities.
Zigmont
Magic F/X
cheaptrick
View Profile
Loyal user
Wilmington, Delaware
251 Posts

Profile of cheaptrick
Just a thought. You might try priming it with some flashcotton.

Should do the deed.



Smile
"Pick any card. NOT that one!!!"
Merlin!
View Profile
New user
63 Posts

Profile of Merlin!
You also may want to try taking the flint & striker (top, metal part) off of a cheap, 50 cent lighter, then painting it with flesh paint, and attaching to your hand (gluing it to a ring, this works quite well for igniting flash paper, and will probably do the job.
The Magic Cafe Forum Index » » Up in smoke! » » Having problems creating (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2019 Steve Brooks. All Rights Reserved.
This page was created in 0.09 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL